Assemble the Storm Shell Back
1. Remove the TV Bracket from the Storm Shell Back right part by removing the four securing bolts.
Figure 2.
Figure 2
2. Place the Storm Shell Back right part and left part together. Connect the two parts using four
(4) S3 bolts with four (4) N2 flange nuts as shown in Figure 3. Note: The bolt head is placed on
the outside of the Storm Shell Back and the flange nuts are secured on the inside. Figure 3.
Figure 3
Screws:
S3-M4x14 screw : 4pcs
N2: M4 flange nut : 4pcs
