Remote control functions
All Vulcan
heaters and their remote controls have the same frequency, so you are able to control several
heaters with one remote.
You can control the heater without the remote. Push the button situated on the right end of the heater.
Replacing the remote battery
1. Press the battery compartment and slide out
2. Replace the worn battery
3. Slide the battery compartment back until it clicks
Do not allow water or liquid to get into the remote control.
1. Power button – turns the heater on and off
2. Down button – Decreases the temperature, timer and level
3. Up button – Increases the temperature, timer and level
4. Level button – Use to adjust the heat levels. (L1-L4) use the up and down buttons to increase or decrease
the heat level
5. Timer button – The number being the number of hours it will run for. T0 will display, then use the up and
down buttons to select the number of hours you would like to set it for (T0 off -T9 max)