•
Recommended degree to mounting surface is 45°. See figure 4.
•
The infrared heater could also be adjusted slightly from left to right. The max. degree of
movement is 90°.
•
Fix the mounting bracket on the wall securely. Alternatively this heater can be attached to
a heater stand.
•
If mounted facing straight down, heaters need to be in a well-ventilated area and must be at
least 0.5M away from any ceiling or obstructions to the airflow above them. See figure 3.
Figure 1: Mounting bracket (wall
bracket) and anchor raw-plugs.
Figure 2: Connection from the stand to the
infrared heater. (Stands can be purchased
separately.)
Figure 3: Min. distance to floor, ceiling
and wall
Figure 4: Tilt angle
Hanging
Specifications
Voltage (V)
□
220-240V
Power (W)
□
1500W
□
2000W
□
2×1500W
□
2×2000W
IP protection
□
IP65
Cleaning and Maintenance
•
Before cleaning remove the plug from the power outlet and wait until the appliance is
sufficiently cooled.
•
Wipe the appliance with clean lint-free cloth or a soft brush.
•
Never use abrasive cleaners, scrubbing brushes and chemical cleaners.
•
To protect against electrical shock, do not immerse cord, plug, or any part of the heater in
water or other liquid.
•
For heating element replacement ,please contact the manufacturer or its service agent or a
similarly qualified person.
Disposal
In accordance with European Directive 2002/96/EG concerning used electrical and
electronic appliances (waste electrical and electronic equipment – WEEE), please return
any electrical equipment that you will no longer use to the collection points provided for
their disposal.
This symbol indicates that the appliance cannot be treated as normal domestic trash, but
must be handed to a collection point for recycling electric and electronic appliances.
Information concerning where the equipment can be disposed of can be obtained from
your local authority.
