8
Assembly Instructions
5 . Connect the heating module to the heater stand by inserting 1 x M8X50 and 2 x
M8X10 into their corresponding holes and tighten until secure. Connect the easy-fit
plug between the heating module and the heater stand and tighten .
3 . Connect the poles assembled in the previous steps to the heater base . Insert
4 x M8X8 screws into the corresponding holes in the heater and tighten until
secure . Position the base and heater stand upright .
1
2
4 . Bolt the base securely to the ground with the expansion screws .
1
1
2
3
4
5
