Heat Controller SMA 18, Руководство по установке, Страница: 11 / 14

Heat Controller, Inc.
INSTALLATION INSTRUCTIONS
SMA/SMH 18/24
10
4. Wiring Connection
A.
Use a dedicated circuit. Use HACR break sized per
unit’s rating plate. Size wires according to minimum
circuit ampacity shown on the unit’s rating plate.
• Be sure to comply with local and national electri -
cal codes while running the wire from the indoor
unit to the outdoor unit.
• Install disconnects fro the outdoor and indoor
units as required by national and local electrical
codes.
• Every wire must be connected firmly. Loose wir -
ing may cause the terminal to overheat or result
in unit malfunction. A fire hazard may also exsist.
NOTE : To prevent wire from loosening, secure
wires and/or cords under cord clamp.
B.
C.
D.
E.
F.