B-VFH-1 Multi-Zone Wireless / Wired Remote Control Heat Controller
4
Auto
Fan
Heating
Dry
Cooling
3.3 Temperature Setting
Press ▲or ▼ to increase/decrease the preset temperature. When pressing either of them
continuously, the temperature will be increased or decreased by 1 every 0.5s,as shown in Fig.
6. In the Cooling, Dry, Fan or Heating mode, the temperature setting range is 60°F~86°F.
In the Auto mode, the temperature setting is unadjustable.
3.2 Mode Setting
Under the “On” state of the unit, press Mode to switch the operation modes as the following
sequence: Auto-Cooling-Dry-Fan-Heating.
3 Operation Instructions
3.1 On/Off
Press On/Off to turn unit on. Pressing once more will turn unit off.
Note: The state shown in Fig. 4 indicates the “Off” state of the unit after power on. The state
shown in Fig. 5 indicates the “On” state of the unit after power on.
Fig. 4 “Off” State
Fig. 5 “On” State
