manualshive.com logo in svg

Heat & Glo XLR-N-AU, Руководство пользователя, Страница: 4 / 70

Поделиться
Скачать
Heat & Glo XLR-N-AU Скачать руководство пользователя страница 4

Heat & Glo  •  XLR-N-AU, XLR-PB-AU •  2198-906 Rev. M •  5/12

4

    Safety Alert Key:

•  DANGER! 

Indicates a hazardous situation which, if not avoided will result in death or serious injury.

•  WARNING! 

Indicates a hazardous situation which, if not avoided could result in death or serious injury.

•  CAUTION!

 Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

•  NOTICE:

 Used to address practices not related to personal injury.

Table of Contents

A.  Congratulations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

B.  Limited Lifetime Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . 6

1 Listing and Code Approvals 

 

A.  Appliance Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
B.  Gas Pressure Requirements . . . . . . . . . . . . . . . . . . . . . . . 9
C.  High Altitude Installations . . . . . . . . . . . . . . . . . . . . . . . . . . 9
D.  Non-Combustible Materials Specification. . . . . . . . . . . . . . 9
E.  Combustible Materials Specification  . . . . . . . . . . . . . . . . . 9
F.  Electrical Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

User Guide

2 Operating Instructions 

 

A.  Gas Fireplace Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
B.  Your Fireplace  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
C.  Clear Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

D.  Decorative Doors and Fronts . . . . . . . . . . . . . . . . . . . . . .

11

E.  Decorative Media Options . . . . . . . . . . . . . . . . . . . . . . . .

11

F.  Fixed Glass Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

G. Remote Controls, Wall Controls and Wall Switches . . . . .

11

H.  Before Lighting Fireplace . . . . . . . . . . . . . . . . . . . . . . . . .

11

I.  Control Module Operation  . . . . . . . . . . . . . . . . . . . . . . . . 12
J.  Lighting Instructions (IPI) . . . . . . . . . . . . . . . . . . . . . . . . .

13

K.  After Fireplace is Lit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
L.  Frequently Asked Questions  . . . . . . . . . . . . . . . . . . . . . . 14

3 Maintenance and Service 

 

A.  Maintenance Tasks-Homeowner . . . . . . . . . . . . . . . . . . . 15
B.  Maintenance Tasks-Qualified Service Technician  . . . . . . 16

4 Getting Started 

 

Installer Guide

A.  Typical Appliance System. . . . . . . . . . . . . . . . . . . . . . . . . 

17

B.  Design and Installation Considerations . . . . . . . . . . . . . . 18
C.  Tools and Supplies Needed . . . . . . . . . . . . . . . . . . . . . . . 18
D.  Inspect Appliance and Components . . . . . . . . . . . . . . . . . 18

5 Framing and Clearances 

 

A.  Selecting Appliance Location . . . . . . . . . . . . . . . . . . . . . . 19
B.  Constructing the Appliance Chase . . . . . . . . . . . . . . . . . . 20
C.  Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
D.  Mantel and Wall Projections . . . . . . . . . . . . . . . . . . . . . . . 21

6 Termination Locations 

 

A.  Vent Termination Minimum Clearances . . . . . . . . . . . . . . 22

7 Vent Information and Diagrams 

 

A.  Approved Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
B.  Vent Table Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
C.  Use of Elbows  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
D.  Measuring Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
E.  Vent Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

8 Vent Clearances and Framing 

 

A.  Pipe Clearances to Combustibles  . . . . . . . . . . . . . . . . . .

31

B.  Wall Penetration Framing . . . . . . . . . . . . . . . . . . . . . . . . .

31

C.  Install the Ceiling Firestop . . . . . . . . . . . . . . . . . . . . . . . . 32
D.  Install Attic Insulation Shield . . . . . . . . . . . . . . . . . . . . . . .

33

9 Appliance Preparation 

 

A.  Top Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
B.  Securing and Leveling the Appliance . . . . . . . . . . . . . . . . 35
C.  Installing the Optional Heat-Zone®-240V Kit . . . . . . . . . . 35

10 Installing Vent Pipe (SLP Pipe) 

 

A.  Assemble Vent Sections. . . . . . . . . . . . . . . . . . . . . . . . . . 36
B.  Assemble Slip Sections . . . . . . . . . . . . . . . . . . . . . . . . . .

37

C.  Secure The Vent Sections . . . . . . . . . . . . . . . . . . . . . . . .

37

D.  Disassemble Vent Sections . . . . . . . . . . . . . . . . . . . . . . . 38
E.  Install Decorative Ceiling Components  . . . . . . . . . . . . . . 38
F.  Install Metal Roof Flashing . . . . . . . . . . . . . . . . . . . . . . . . 39
G. Assemble and Install Storm Collar . . . . . . . . . . . . . . . . . . 39
H.  Install Vertical Termination Cap . . . . . . . . . . . . . . . . . . . . 40
I.  Install Decorative Wall Components  . . . . . . . . . . . . . . . . 40
J.  Heat Shield Requirements for Horizontal Termination . . . 40
K.  Install Horizontal Termination Cap . . . . . . . . . . . . . . . . . . 41

11 Gas Information 

 

A.  Gas Pressure Requirements . . . . . . . . . . . . . . . . . . . . . . 42
B.  Gas Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
C.  High Altitude Installations . . . . . . . . . . . . . . . . . . . . . . . . . 43

12 Electrical Information 

 

A.  Wiring Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
B.  IntelliFire Plus™ Ignition System Wiring  . . . . . . . . . . . . . 44
C.  Optional Accessories Requirements  . . . . . . . . . . . . . . . . 44
D.  Electrical Service and Repair . . . . . . . . . . . . . . . . . . . . . . 45
E.  Junction Cord Information . . . . . . . . . . . . . . . . . . . . . . . . 45

Содержание XLR-N-AU







































































Отзывы:

Нет отзывов