manualshive.com logo in svg

Heat & Glo SL-550METRO, Руководство пользователя, Страница: 3 / 77

Поделиться
Скачать
Heat & Glo SL-550METRO Скачать руководство пользователя страница 3

3

Heat & Glo  •  SL-550METRO, SL-550METRO-LP  •  2185-900 Rev. D  •  8/09

    Safety Alert Key:

• DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury.

• WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury.

• CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

• NOTICE: Used to address practices not related to personal injury.

Table of Contents

A.  Congratulations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
B.  Limited Lifetime Warranty . . . . . . . . . . . . . . . . . . . . . . . . . .  5

1 Listing and Code Approvals 

 

A. Appliance Certifi cation . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
B.  Tempered Glass Specifi cations  . . . . . . . . . . . . . . . . . . . . .  7
C. BTU Specifi cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
D.  High Altitude Installations . . . . . . . . . . . . . . . . . . . . . . . . . .  7
E.  Non-Combustible Materials Specifi cation. . . . . . . . . . . . . .  7
F.  Combustible Materials Specifi cation  . . . . . . . . . . . . . . . . .  7
G.  Electrical Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
H.  Requirements for the Commonwealth of Massachusetts . .  8

User Guide

2 Operating Instructions 

 

A.  Gas Fireplace Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
B.  Your Fireplace  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
C.  Clear Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
D.  Decorative Doors and Fronts . . . . . . . . . . . . . . . . . . . . . .  10
E.  Fixed Glass Assembly  . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
F.  Remote Controls, Wall Controls and Wall Switches . . . . .  10
G.  Before Lighting Fireplace . . . . . . . . . . . . . . . . . . . . . . . . .  10
H.  Lighting Instructions (IPI) . . . . . . . . . . . . . . . . . . . . . . . . .  11
I.  After Fireplace is Lit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12
J.  Frequently Asked Questions  . . . . . . . . . . . . . . . . . . . . . .  12

3 Maintenance and Service 

 

A.  Maintenance Tasks-Homeowner  . . . . . . . . . . . . . . . . . . .  13
B. Maintenance Tasks-Qualifi ed Service Technician  . . . . . .  14

4 Getting Started 

 

Installer Guide

A.  Typical Appliance System. . . . . . . . . . . . . . . . . . . . . . . . .  16
B.  Design and Installation Considerations  . . . . . . . . . . . . . .  17
C.  Tools and Supplies Needed . . . . . . . . . . . . . . . . . . . . . . .  17
D.  Inspect Appliance and Components . . . . . . . . . . . . . . . . .  17

5 Framing and Clearances 

 

A.  Selecting Appliance Location . . . . . . . . . . . . . . . . . . . . . .  18
B.  Constructing the Appliance Chase . . . . . . . . . . . . . . . . . .  19
C.  Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19
D.  Mantel and Wall Projections . . . . . . . . . . . . . . . . . . . . . . .  20

6 Termination Locations 

 

A.  Vent Termination Minimum Clearances . . . . . . . . . . . . . .  21

7 Vent Information and Diagrams 

 

A.  Approved Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23
B.  Vent Table Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23
C.  Use of Elbows  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23
D.  Measuring Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23
E.  Use of Flex Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  24
F.  Vent Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  25

8 Vent Clearances and Framing 

 

A.  Pipe Clearances to Combustibles  . . . . . . . . . . . . . . . . . .  38
B.  Wall Penetration Framing . . . . . . . . . . . . . . . . . . . . . . . . .  38
C.  Install the Ceiling Firestop  . . . . . . . . . . . . . . . . . . . . . . . .  39
D.  Install Attic Insulation Shield . . . . . . . . . . . . . . . . . . . . . . .  40

9 Appliance Preparation 

 

A.  Top Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  41
B.  Rear Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  42
C.  Securing and Leveling the Appliance . . . . . . . . . . . . . . . .  43

10 Installing Vent Pipe (DVP and SLP Pipe)   

A.  Assemble Vent Sections (DVP Pipe Only) . . . . . . . . . . . .  44
B.  Assemble Vent Sections (SLP Pipe Only) . . . . . . . . . . . .  45
C.  Assemble Slip Sections . . . . . . . . . . . . . . . . . . . . . . . . . .  45
D.  Secure the Vent Sections . . . . . . . . . . . . . . . . . . . . . . . . .  46
E.  Disassemble Vent Sections . . . . . . . . . . . . . . . . . . . . . . .  46
F.  Install Decorative Ceiling Components (SLP only) . . . . . .  47
G.  Install Metal Roof Flashing . . . . . . . . . . . . . . . . . . . . . . . .  48
H.  Assemble and Install Storm Collar . . . . . . . . . . . . . . . . . .  48
I.  Install Vertical Termination Cap  . . . . . . . . . . . . . . . . . . . .  49
J.  Install Decorative Wall Components (SLP only) . . . . . . . .  49
K.  Heat Shield Requirements for Horizontal Termination . . .  49
L.  Install Horizontal Termination Cap (DVP and SLP Pipe)  .  50

11 Gas Information 

 

A.  Fuel Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  51
B.  Gas Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  51
C.  Gas Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  51
D.  High Altitude Installations . . . . . . . . . . . . . . . . . . . . . . . . .  51

12 Electrical Information 

 

A.  Wiring Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . .  52
B.  IntelliFire Ignition System Wiring  . . . . . . . . . . . . . . . . . . .  52
C.  Optional Accessories Requirements  . . . . . . . . . . . . . . . .  52
D.  Electrical Service and Repair . . . . . . . . . . . . . . . . . . . . . .  52
E.  Junction Box Installation. . . . . . . . . . . . . . . . . . . . . . . . . .  54

Î

Î

Содержание SL-550METRO














































































Отзывы:

Нет отзывов