Heat & Glo SL-3X Скачать руководство пользователя страница 22

Страница: 22 / 25

Heat & Glo • SL-3X, SL-5X, SL-7X, SL-9X Owner’s Manual • 2372-981 Rev. F

• 7/17

Reference Materials

A. Accessories

Remote Controls, Wall Controls and Wall
Switches

After a qualified service technician has installed the re

mote control, wall control or wall switch, follow the in-

structions supplied with the control installed to operate

your fireplace:

For safety:

• Install a switch lock or a wall/remote control with child

protection lockout feature.

• Keep remote controls out of reach of children.
See your dealer if you have questions.

Optional Heat-Zone

Gas Kit

After a qualified service technician has installed the

Heat-Zone

Gas Kit, follow the instruction supplied with the

kit for operation. See your dealer if you have questions.

Install approved accessories per instructions included

with accessories. Contact your dealer for a list of ap-

proved accessories.

WARNING!

Risk of Fire and Electric Shock!

Use ONLY

Hearth & Home Technologies-approved optional acces

sories with this appliance. Using non-listed accessories

could result in a safety hazard and will void the warranty.

Содержание SL-3X


























Результаты поиска

Содержание SL-3X

Отзывы:

Бренды по названию

Популярные бренды

Heat & Glo SL-3X, Руководство пользователя

Результаты поиска

Содержание SL-3X

Отзывы:

Бренды по названию

Популярные бренды