3
Heat & Glo • LOGS-I35FB Log Instructions • 2202-935 Rev. F • 5/18
Figure 8. Place Log #5
Figure 9. Place Log #6
Log #5 (SRV2202-705):
See Figures 2 and 3 for additional references. Place the thick end of Log #5 on the flat spot of
Log #1. Locate the groove on the thin end of the log. Mate the groove with the grate bar as shown above. Center the tip
of Log #5 between the ends of Log #3 and Log #4.
5
6
PLACE LOG
ON FLAT SPOT
FLAT SPOTS
FOR LOG #6
PLACE LOG
ON FLAT SPOT
PLACE LOG
ON FLAT SPOT
Log #6 (SRV2202-706):
See Figures 2 and 8 for additional references. Place the thick end of the log on the flat spot of Log
#2. Place the thin end of Log #6 on the flat spot of Log #5 as shown in Figure 9.
GROOVE MATES
WITH GRATE BAR
CENTER
BETWEEN
LOG #3 AND
LOG #4
