3
Heat & Glo • LOGS-COSMO32, LOGS-COSMO42 Installation Instructions • 2491-932 Rev. D • 12/17
3
3
11
12. Install Log #4 by placing the forked end down onto
the base pan and leaning the top end of Log #4 back
so that it is resting on Log #3. The forked end should
contact two placement tabs. See Figure 8.
Figure 7. Log #1 and Log #3 Alignment (SLR-X-AU Only)
3
3
33
44
44
55
11
11
22
22
Figure 8. Place Log #4
AREA FOR LOG #5
AREA FOR LOG #5
Figure 9. Place Log #5
LOG LOCATING TABS
LOG LOCATING TABS
LOG LOCATING TAB
LOG LOCATING TAB
13. Install Log #5 by placing the forked end down as shown
in Figure 9. One side of the fork will rest on Log #3 and
the other side of the fork will touch the designated log
placement tab. The other end of the log rests on the
smooth area on Log #2 noted in Figure 8. See Figure
9.
3
3
44
55
66
11
22
Figure 10. Place Log #6
14. Install Log #6 by placing the right end of the log against
the right log tab. The left end of the the log will contact
the back side of the tab.
TAB
TAB
TAB
TAB
