Heartway Medical Products S23K, Руководство пользователя

Страница: 25 / 33

AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
These items are all prelubricated, sealed, and require no subsequent lubrication.
WHEEL REPLACEMENT
If your scooter is equipped with pneumatic tires and you have a flat tire, you can have the tube
replaced. If your scooter is equipped with a solid tire insert either the solid insert or the entire wheel
must be replaced depending on the model. Contact your authorized dealer regarding replacement
wheels for your scooters.

Wheels on your scooter should only be serviced/replaced by a qualified technician.

Completely deflate pneumatic tires before dismantling the rim or attempting repair.

Be sure that the key is removed from the key switch and the scooter is not in free-wheel mode
before performing this procedure repair.

When changing a pneumatic tire, remove only the lug nuts, then remove the wheel. If any further
disassembly is required, deflate the tire completely or it may explode.
MOTOR BRUSHES
The motor brushes are housed inside of the motor transaxle/assembly. They should be inspected
periodically for wear by your authorized dealer.
CONSOLE, CHARGER, AND REAR ELECTRONICS

Keep these areas free of moisture.

Allow these areas to dry thoroughly if they have been exposed to moisture before operating your
scooter again.
STORING YOUR SCOOTER
If you plan on not using your scooter for an extended period of time, it is best to:

Fully charge its batteries prior to storage.

Disconnect the batteries from the scooter.

Store your scooter in a warm, dry environment.

Avoid storing your scooter where it will be exposed to temperature extremes.

Operating conditions (-15
℃
~ +50
℃
) and Storage conditions (-40.
℃
~+65
℃
)
25