Heartway Medical Products S19F, Руководство пользователя, Страница: 27 / 31

Note: If you experience any technical problems, it is recommended that you check with
your local dealer before attempting to troubleshoot on your own.
The following symptoms could indicate a serious problem with your power wheelchair.
Contact your local dealer if any of the following arises:
TROUBLE SHOTTING & ERROR CODE
Dynamic 50 AMP CONTROLLER: Your power wheelchair is fitted with DYNAMIC
controller, which continuously monitors the operating conditions of your power
wheelchair. If it detects a problem it will indicate with error message by flashing light on
the power ON/ OFF light. You must count the number of the flash, and see the list to
check what kind of error has happened according to the number)
If, when powered up, there is an error with the system, then the status indicator will
flash red. The number of flashes will indicate the type of error.
These are described in the table below.
1. Motor noise
2. Frayed harnesses
3. Cracked or broken connectors
4. Uneven wear on any of tires
5. Jerky motion
6. Pulling to one side
7. Bent or broken wheel assemblies
8. Does not power up
9. Powers up, but does not move
Flash Code Error Description
1 Remote/Joystick error
2 Network or configuration error
3 Left motor error
4 Right motor error
5 Left park brake error
6 Right park brake error
7 Module error (other than remote)
25