15
※
Year mode: enter “YEAR” using up and down arrows, then press Set to
finish set up process.
※
Date mode: enter “MONTH” and “DATE” using up and down arrows,
then press Set to finish set up process
※℃
/
℉
mode: press up or down to select ”
℃
/
℉
” then press Set to finish
set up process.
Press and hold “SET” for more than 5 seconds: to switch between “Date” or “Time”
display format (To switch the display format on LCD from date format to time
format or from time format to date format.
2.
button:
* Increase
3. button:
*Decrease
4 . button
：
Headlight switch button, press once to turn on the headlight, LCD
background light turned on at the same time. Press again to turn the headlight off.
5. button: Left signal lights switch button, press once to turn left signal lights
on. (Both left front and back signal lights will flash and horn will beep once per
second, press
again to turn left signal lights off.)
6. button: Right signal lights switch button, press once to turn right signal
lights on. (Both right front and back signal lights will flash and horn will beep once
per second, press
again to turn right signal lights off.)
7. button: hazard lights switch button, press once to turn hazard lights on,
Both right / left front and back signal lights will flash and horn will beep once per
second, press again to turn hazard lights off.
8. button: Press this button to sound the horn.
Horn sounds when you press any of the following buttons on the controller.
One button can be activated at a time. The most recently pressed button
always overrides the previous button pushed.
A.
Driving:
1.
Controller ON/OFF Switch
Insert the key to power on the scooter (Remove the key to power off). (See Fig 20)
Swing the finger lever control forward or backward to control the driving direction
of the vehicle (The finger lever control located both sides of the controller
