11
(Fig 18 ) (Fig 19)
6.Installing Controller and Connect Cables
Assemble the controller (#8) on right armrest bracket with 2 screws.(See Fig 20).
There is 1 main plug (4 pins) in the other end on the controller. Please plug in the
main frame (#1) plugs, then make sure tightly connection.(See Fig 21 ).
(Fig 20) (Fig 21)
Note:
Installing the Batteries (y
ou can omit this step if your scooter already
assembled the batteries)
Take out the cover from the base frame slightly. Put the batteries to the battery loops
and connect the cable (2 ends) with the battery positive and negative poles in batteries.
(See Fig 22)
Note: There is a battery circuit diagram
labeled on the backside of the shroud.
Please refer this diagram before you
assemble the battery.
(Fig 22)
Controller
4 pins plug
Connected
＋
/
－
Pole
