Heartland RAINIER, Инструкция по сборке

Страница: 44 / 62

42
Move to the opposite end. Using the long
edge of the panel as a lever move the
panel side-to-side until the top corner is
flush to the peak (Fig. C) and there is 1/4"
measurement to the gable trim (Fig. D) .
You may need to move your backwall to
get the 1/4" measurement. Secure panel
with two 2" nails in the corners.
2
You must square the roof by attaching one panel fist. You will use the panels’ long
edge as a lever to bring your roof into square. Commonly known as “racking”.
Roof panels may cause serious injury
until securely fastened.
Attach the
45-1/8 x 96”
panel with the
rough side up (painted-grid lines side) with
a 3/4" measurement on the rafter
(Fig B)
and the panel flush at the peak (Fig. A) .
Secure panel with two 2” nails in the
corners.
1
BEGIN
Two Nails
2" (5 cm) x196
PARTS REQUIRED:
ROOF PANELS
3/4"
GAUGE
BLOCK
DO
OR
7/16 x 23-7/8 x 41-7/8"
(1,1 x 61 x 106 cm)
x2
7/16 x 41-7/8 x 96"
(1,1 x 106 x 244 cm)
x2
7/16 x 23-7/8 x 45-1/8"
(1,1 x 61 x 115 cm)
x2
7/16 x 45-1/8 x 96"
(1,1 x 115 x 244 cm)
x2
45-1/8"
(115 cm)
Flush at peak.
Fig. A
Flush at peak.
Fig. C
3/4"
(1,9 cm)
Fig. B
Gauge
Block
1/4"
(6 mm)
1/4"
(6 mm)
Gable
Trim
Fig. D