HearthStone Heritage 8090 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 53

HearthStone Heritage 8090 Скачать руководство пользователя страница 28

Hearthstone Quality Home Heating Products, Inc.

Heritage Model 8090 Pellet Stove

Page 28 of 53

Operation

MANUAL Mode

The user is required to turn the stove on, off, and adjust the heat output manually in

Man

Mode.

Turning on the Stove:

Press the

button. The stove will run through the startup process and then operate at the heat output level

selected.

Adjusting the Heat Output:

Use the

and

buttons to adjust the heat output.

Note: The setting of 100 represents 100% of the maximum heat output and 30 equals 30% of the

maximum output.

Turning off the Stove:

Press, and hold the

button for three seconds.

The stove will run through the shutdown process until the fire is extinguished.

THERMOSTAT Mode

THERMOSTAT

mode works the same as

MANUAL

; with the exception that

THERM

Mode can be controlled by a

wall thermostat. To connect a wall thermostat to the stove refer to the Installation section in this manual. Do not
connect the Room Sensor if using a thermostat.

Turning on the Stove:

Press the

button on the display. The stove will now turn on when the wall thermostat calls for heat. The

stove will run through the startup process and then operate at the heat output level selected.

Adjusting the Heat Output:

Use the

and

buttons to adjust the heat output.

Note: The setting of 100 represents 100% of the maximum heat output and 30 equals 30% of the

maximum output.

Turning off the Stove:

Press, and hold the

button for three seconds. Or, adjust the wall thermostat so that it is not calling for heat.

The stove will run through the shutdown process until the fire is extinguished.

AUTOMATIC Mode

Connect the included room sensor to operate your stove in

AUTO

Mode. Refer to the Installation section of this

manual for instruction on how to connect the room sensor to the stove.

To Turn On or Off:

In Programmable mode, press the

button to turn the stove on, and hold the

button for three seconds

to turn it off.

Note: The stove will not ignite if the set temperature is already achieved.

Adjust the Room Temperature:

Use the

and

buttons to adjust the room temperature settings. The stove will automatically adjust the

BTU output to meet the heating requirements of the room. The stove will turn on when heat is required, and off
when the desired temperature is reached.

PROGRAMMABLE Mode

PROGRAMMABLE

mode functions identically to

AUTOMATIC

mode with the addition that the stove can be set to operate at

two different temperature settings – home and away. Both of these temperature settings can be cycled twice daily.

You must connect the included room sensor to operate your stove in

PROG

Mode.

«
...
26
27
28
29
30
...
»

Содержание Heritage 8090






















































Отзывы:

Нет отзывов