Step C:
Assemble the front support frame as shown
in the figure.
Step E:
Using hook and loop strips, hang the net from the
middle pole #3 and attach to the front poles #3. Attach
the net to both sides of the frame. Attach to the top of the
frame with one hook and loop strip. Next, attach lower
rim #2 to parts #7 and 8, lining up the side with the push
button to the hole in #7. Before attaching, it is helpful to
slip the sides of the pole through the net. Finally, hang the
target board using hook and loop strips.
(continued on next page)
#
6
#
6
#
3
#
3
Step D:
Join the front and rear supporting frames by
carefully pressing the clip-on parts #14, 15, and 16 onto
the poles of the frame as shown in the figure.
#
16
#
15
#
15
#
14
#
16
#
1
#
2
#
18
