Hearth Technologies mix back, Руководство пользователя

Страница: 10 / 27

Mix Back User Guide
9
Remote Control RJ45 Pin Outs:
Pin Function
1 D
2 Digital -
3 Ground
4 +18 VDC
5 No Connect
6 Ground
7 +18 VDC
8 No Connect
1
2
3
4
5
2
3
4
5
TALKBACK REMOTE CONTROL
(Optional)
Remote Output: The Mix Back Remote is
connected to the Mix Back using standard
CAT5e cable. (wired 1 to 1)
Switches 1-12: Routes the talkback microphone
to the corresponding Mix Back master sections.
Very useful for talking to a particular “more me”
output. Talkback is useful for live and studio
personal cue.
ST1/ST2: When selecting ST1 and/or ST2
switches, one can talk to everyone listening to
those corresponding stereo mixes.
COM: The COM button turns on the talkback
balanced output connector on the rear panel and
closes the talkback relay (for light beacons,
dimming module for control rooms, the Talk Back
600 MV logic input, etc.).
ALL: The ALL switch permits the talkback
microphone to route to all outputs at the same
time. This can be thought of as a broadcast to
everyone connected to the Mix Back outputs.
1
Relay Output:
1 = Normally Open (Top Pin)
2 = Common (Center Pin)
3 = Normally Closed (Bottom Pin)