Hearth & Home Technologies • Log Placement Instructions • 2129-935 Rev. C • 2/17
2
STEP 2. Log #2 (SRV2129-705):
Locate portion of Log #2 that is highlighted in Figure 5. Place that portion of Log
#2 on the indentation on Log C. Log #2 will rest on the tip of Log B. Slide the bottom of Log #2 up to the edge of the burner
as shown in Figure 6.
Figure 6. Placement of Log #2
22
STEP 3. Log #3 (SRV2129-707):
Place Log #3 so that it rests on the indentations located on Log #2 and Log D.
Log 3 should extend beyond Log #2 by one inch.
Figure 8. Placement of Log #3
Figure 5. Placement of Log #2
Figure 7. Placement of Log #3
B
B
C
C
D
D
B
B
22
BURNER EDGE
BURNER EDGE
1 in.
1 in.
2
2
PILOT
PILOT
PILOT
PILOT
PILOT
PILOT
PILOT
PILOT
3
3
22
D
D
Model: GDCR4136I and RCOR-DV36IN
STEP 1. Log #1 (SRV2129-704):
Place Log #1 on Log A. The end and bottom of Log #1
fi
t into the indentation on
Log A highlighted in Figure 9. The Y-shaped end of Log #1 will rest on the smooth area of Log B as shown in Figure 10.
Figure 9. Placement of Log #1
Figure 10. Placement of Log #1
11
A
A
11
A
A
B
B
B
B
