10
Hearth & Home Technologies • PH-FRT, PH-SIDE Instructions • 2600-970 Rev. H • 4/20
6. Insert pull tool into slots on left and right sides of
appliance. See Figure 13.
7. Carefully pull the heat shield out of the appliance as
shown in Figure 14 and Figure 15. Discard heat
shield. Repeat procedure on other side if application
is on a see-through appliance.
Figure 14 Use Pull Tools to Remove Heat Shield
Figure 12 Pull Tools Separated
Figure 13 Pull Tool Inserted Into Slot
REMOVE SCREWS
REMOVE SCREWS
PULL TOOLS
PULL TOOLS
Figure 15 Remove Heat Shield
9.
Side Discharge Only:
Instructions continue on the
following page.
WARNING! Risk of Fire!
Remove all debris and objects
from firebox top and appliance top before operating the
appliance.
8. Inspect for and remove all debris that may have
accumulated or objects that may have been placed on
the firebox top and appliance top during the installation
process. All debris and objects must be removed
prior to operation of the appliance. Firebox top and
appliance top are shown in Figure 16.
Figure 16
APPLIANCE TOP
FIREBOX TOP
