1
Hearth & Home Technologies • BRICK-MI25, BRICK-MI30, BRICK-MI35 Refractory Kit Instructions • 2532-936 Rev. C • 3/19
BRICK-MI25, BRICK-MI30, BRICK-MI35
Models:
SUPREME-I25-IFT, SUPREME-I30-IFT, SUPREME-I35-IFT, RUBY25IN, RUBY25IL, RUBY30IN, RUBY30IL, RU-
BY35IN, RUBY35IL, EXCURSION-I, EXCURSION-II, EXCURSION-II, PROV-I30-IPI, PROV-I35-IPI JASPER30IN, I30X-AU
- Refractory Installation Instructions -
CAUTION! Risk of Cuts or Abrasions.
Wear protective
gloves and safety glasses during installation.
NOTICE: Handle refractory panels with care. Refractory
may chip or crack if dropped or impacted.
KIT COMPONENTS (Refractory shown in Figure 1)
(1) Left Refractory
(1) Right Refractory
(1) Back Refractory
(1) Base Refractory
Leave this manual with party responsible for use
and operation.
Figure 3. Empty Firebox
Figure 1. Refractory Kit Components
INSTALLATION
PROV-I30-IPI, PROV-I35-IPI & JASPER30IN Only:
Discard base refractory. Base refractory not used with
these models.
1. Install base refractory. See Figure 4.
Figure 4. Base Refractory Installed
Figure 2. Cut Side Panels - PROV-I30-IPI & JASPER30IN Only
CUT
CUT
PROV-I30-IPI, PROV-I35-IPI & JASPER30IN Only:
Cut the bottom leg off of the right and left refractory. See
Figure 2.
Service Parts:
If replacement panels are needed, the entire kit must be
ordered.
I30X-AU INSTALLATION INSTRUCTIONS,
SKIP TO PAGE 3.
