Power
Heating
Water
Refri
Cleaning Water Pipe
Place a cup under the dispensing nozzle.
Check if the water source meets the cleaning requirements.
Turn on the power switch. The internal water supply system will
run automatically.
Press the cleaning key on the lower panel and the water will
automatically fall into the cup after connecting the cleaning tube.
Press the “CLN” key turn the system to cleaning mode by
indicating of light on the key. Then press A/B/C to clean the hose
as required. Press “Cleaning” key again to exit from cleaning mode
and return to normal standby mode.
CLN
A. Mixer and Stirring Cup
After taking out the cup,
pull part A up to remove.
Lift part B up for disassembling.
Turn the powder mixer and stirring
cup and remove it by following the
direction of arrow.
Pull the dispensing nozzle and
the connecting hose.
Decomposing Parts
13
