Alternating Between Programs
Ma
intenance
12
11
Troubleshooting
Your hearing
aid is pre-programmed with
4 different listening programs.
When
the hearing
aid
is turned ON, it will automatically be in program 1.
Pressing
the
program button
will change
the program according to the preset sequence: 1, 2,
3 and 4.
An audible beep will help you identify the preset programs.
Example:
program 1 will emit 1 beep, program 2 will emit 2 beeps, etc.
Standard program setting and recommended us
e
environment:
Program 1
Program 2
Program 3
Program 4
SYMPTOM
No/low
sound
amplification
Whistling
or
feedback
POSSIBLE CAUSE
Low battery
Built-up wax in the dome
Excessive ear wax
Volume set too low
Improper dome insertion
Hearing change
Improper dome insertion
Hearing
aid
damaged
SOLUTION
Recharge the
hearing aid
Clean the dome
or
replace the old dome
Consult your physician
Turn up the volume
Re-insert the dome
Contact your hearing care professional
Re-insert the dome
into your ear so that it is
flush with the walls of the ear canal
Contact
Hearing Assist
Dome
is
wrong size
or
damaged
Replace with new or better fitt
ing
dome
Noisy environments,
such as restaurants.
Higher noise
reduction
.
TV mode.
Reduces low and
high frequency
sounds to focus
on TV sound.
Outdoors. Noise
reduction focused
for wind
.
Quiet environments,
such as home and
office use. High
fidelity and low noise
reduction.
