9
V. Installation Instructions
5.11 Remove the Access Cover, which is secured by two magnets,
from the bottom of the unit. There are two (2) Outlet Ports on the
unit, with one on each side of the Housing. Generally, one shall
be blanked-off and the other used for connection with a duct to
the HealthyAir
®
Air Purification System. Install the Blank-Off Plate
on one side and the Outlet Flange on the other side, by passing
them thru the opening at the bottom of the Housing, as shown in
Fig. 11.1, and mounting them on the (4) Stud Screws,
respectively. Using the Hex Nuts, tighten and secure the Outlet
Flange and the Blank-Off Plate. Finally, reinstall the Access
Cover.
Note that, there are four types of Outlet Flanges available; a
Single Circular Outlet Flange, Dual Circular Outlet Flange
Oval Outlet Flange, and Rectangular Outlet Flange.
Fig. 11.1
– Installation of Blank-Off Plate and Outlet Flange
