14
VI. Operation Guidelines
Optimal Effectiveness
For optimal effectiveness all work that generates fine particulate and fumes
should be performed within 12”, and preferably 6”, of the inlet of the Source
Capture
®
Vent.
Activation of Source Capture
®
Vent
6.1 Plug the Power Cord into the Power Socket, located on the bottom of the
side panel of the unit, and then plug the other end of the cord into a wall
power socket.
6.2 To position the Source Capture
®
Vent in the active-state, simply push the
spring-loaded Pop-up Knob located on the top panel of the unit, grab the
knob, and pull the knob straight up to pull the Inlet Vent from the Housing
Component.
6.3 Turn the LED light on by pressing the On/Off Switch located on the face on
the Inlet Vent.
6.4 Power on the HealthyAir
®
Air Purification System to generate airflow and
activate the Source Capture
®
Vent.
15
VII. Maintenance
Cleaning Source Capture
®
Vent Housing
Once a month inspect the Housing for particulate accumulation. To do so, first
unplug the Power Adaptor from the power socket and then place a waste
container below the Access Cover to catch any dust that drops down after the
Access Cover is removed.
Once the Access Cover is removed, empty the Housing of all debris. A
vacuum cleaner may be used to suck all the dust out of the Housing.
After the Housing have been satisfactorily cleaned, replace the Access Cover and
plug the Power Adaptor into the power socket. The unit is then ready for operation.
