Healthware Fit CP-320, Руководство пользователя

Страница: 7 / 12

3. Install the Saddle Post
Attach the Saddle (7) to the Saddle Post (6) using the Flat Washer (33) and Nylon Nut (34). Next,
insert the Saddle Post (6) into the Main Frame. Tighten using the Knob (31).
Note: When adjusting the height of the Saddle Post (6), the maximum insert depth mark line
cannot be higher than the edge of the tube of Main Frame section.
4.
Install the Handlebar Post
Connect the Sensor Wire (17) from the
Main Frame (1) to the Connective Wire (18)
from the Handlebar Post (4).
Place the end of the Tension Control (20)
into the spring hook of the Tension Cable
(16). Pull the resistance cable of the
Tension Control (20) up, and place it into
the gap of the metal bracket of the Tension
Cable (16).
Finally, insert the Handlebar Post (4) into
the Main Frame (1) and secure it using the
Allen Bolt (19) and Arc Washer (14).