Power off
Power SET (ON / OFF)
to switch on
cm
8
Step 2 :
Once you are in setup mode you
will find preset parameters. To check memory
record of your user press
p
or
q
to select
user code and wait for 6 seconds or tap on
the scale platform to bring display as "0.0kg".
7
Body Fat Measurement
Recall last saved memory record
Step 1 :
When Body fat scale is turned
off press SET button once which will
take you in setup mode.
Step 3
Once the displays shows "0.0kg" press
p
or
q
to check memory record
STEP 1 :
Step on the platform barefooted when the
LCD displays “0.00”
STEP 2 :
Weight reading is locked, now stand still
and keep full contact with the electrodes until the
LCD stops displaying “ ”.
* If it fails to complete the analysis, the LCD will only display the weight data. Try measuring again
by following above methods
STEP 3 :
Your weight (52.8kg) will be displayed followed by Body Fat
(23.8%), Total Body Water (52.8%), Muscle Mass (37.2%), Bone Mass
(12.0%) & calories recommended (1840 kcal). The data will be displayed
three times.
kg
kg
%
%
%
KCAL
%
Press
to enter
Recall mode
p
or
q
Displaying the last test record of the user. Press
p
or
q
for quick page turning.
Repeat 3 times and
switch off automatically
Power off
Start Measuring
1. Position scale on a firm flat surface.
2. Press SET button.
3. While the user code of the latest
measurement is flashing, select your user
number by pressing
p
or
q
button. After
6 seconds, the selected number is locked,
the scale shows “0.0” reading.
kg
cm
Power off
cm
(Note : When the user number is flashing, if you press
SET button again, it will enter the setting mode, after
all the settings are finished, it will display zero reading.)
Wait until the
digits stabilize
kg
LCD shows “0.0"
Weight readings locked
and flash once
Measuring...
kg
%
%
%
KCAL
%
kg
cm
Start Measuring
SET
kg