Plug the transformer (L) on the power cord into a
120-volt outlet.
Refer to the opposite page and make sure that all
wires are fully plugged into the appropriate jacks.
2
1. Press the POWER button on the back of the right speaker. The green indicator on the front of the speaker will light.
2. Rotate the VOLUME control on the right speaker to adjust the volume of both speakers. Note: The volume can
also be adjusted with the buttons on the console (see the user’s manual included with your CD player).
3. Rotate the TREBLE control to adjust the treble response.
L
Before beginning installation, lay all parts in a cleared area and remove the packing materials.
Do not dispose of
the packing materials until installation is completed.
Place the right and left speakers near the front of the treadmill as shown on the front of this guide. Follow the
steps below to connect the speakers.
How to Install the Speakers
How to Operate the Speakers
Locate the audio wire (K). Plug one end of the audio
wire into the INPUT jack on the right speaker. Plug the
other end into the jack on the right upright.
Locate the speaker wire (J) attached to the left speaker.
Plug the speaker wire into the SPEAKER OUT jack on
the right speaker.
Next, plug the power cord (I) into the DC IN 15VDC
jack on the right speaker.
1
I
J
K
3
