background image

5

ASSEMBLY

To hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480.

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the

packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the

included hex keys, assembly requires a phillips screwdriver                      , an adjustable

wrench                     , and a rubber mallet                        .

Use the drawings below to identify the small parts used in assembly. The number in parentheses below each

drawing refers to the key number of the part, from the PART LIST on page 18. The second number refers to the

quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the

parts bag, check to see if it has been pre-assembled.

M10 x 112mm Carriage Bolt (34)–4

M10 x 88mm Button Screw (63)–2

M4 x 16mm

Screw (66)–4

M10 Nylon

Locknut (29)–4

M8 Nylon

Locknut (46)–8

M10 Split

Washer (70)–2

Frame Spacer (83)–2

M4 x 22mm

Screw (93)–2

M8.5 Washer

(53)–12

Large Wave

Washer (20)–2

Wave Washer

(95)–2

M8 Split

Washer (58)–4

M10 x 52mm Bolt Set (27)–2

M8 x 25mm Patch

Screw (22)–4

M8 x 65mm Button

Bolt (89)–4

M8 x 45mm Button

Bolt (50)–4

M8 x 50mm Button

Bolt (82)–4

Содержание C515e Elliptical





















Отзывы: