FIS-001
Page 30 of 33
10.10
Decreasing the Illumination Level Using GUI
The
“Down Arrow”
next to
“Illumination” button
can be clicked to decrease the
brightness of the camera light (LEDs).
[000%] would indicate lowest level possible. (LEDs Turned OFF)
The LED brightness is decreased by 10% every time the button is pressed.
The GUI will have a different representation of each level selected.
Once 0% is reached if the decrease button is pressed again, the LEDs will be turned ON
at 100%.
10.11
Decreasing the Illumination Level Using Button on Device Handle
The
“Down Arrow”
next to
“Illumination” button
can be clicked to decrease the
brightness of the camera LEDs.
The results will be the same.
Up/Down Button on handle is as follows:
The user will observe the Illumination change behavior in the GUI as previously
explained.
[000%] would indicate lowest level possible. (LEDs Turned OFF)
The LED brightness is decreased by 10% every time the button is pressed.
The GUI will have a different representation of each level selected.
Once 0% is reached if the decrease button is pressed again, the LEDs will be turned ON
at 100%.
