HealthCo Milla B420, Руководство пользователя

Страница: 3 / 19

2
WARNINGS
•
DO NOT exceed maximum weight limitation of the bed. The maximum safe working load
(SWL) of the bed is 200 kg. The suggested patient weight is 165 kg. but varies based on
the accessories on the bed.
•
The beds are intended for users who fully understand the content of this manual and is
not intended for use by children.
•
DO NOT operate your bed until it is fully assembled and checked. To avoid injury, DO NOT
attempt to remove the bed from the carton without assistance.
•
DO NOT use accessories that are not designed or approved for use with the bed. Use only
manufacturer approved parts and accessories. DO NOT make modifications to the bed
without authorisation from the manufacturer. Doing so will void the warranty. Serious
harm or death may result from the use of improper parts or accessories.
•
The bed is NOT a transport device. The wheels on the bed are for positioning the bed
only. The wheels must be locked at all times when the patient is on the bed.
•
Never permit more than one person on the bed at one time.
•
Ensure that the individual is properly positioned. The body weight must be evenly
distributed over the sleeping surface. Caution should be used when transferring the
individual to and from the bed.
•
ALWAYS keep hands and feet away from the bottom of the bed and any moving parts to
avoid injury. Due to the low bed clearance, extreme caution should be used as under bed
space and/or moving parts can create crush or pinch points.
•
DO NOT operate the bed with any items under the bed.
•
ONLY use appropriate mattresses and ALWAYS adjust the mattress retainer system
accordingly to ensure the mattress is fixed in place. The mattress must fit the frame
properly to avoid any entrapment issues. The wrong size mattress may cause serious
harm or death.
•
Inspect the castors every six months to check for tightness and wear.
•
DO NOT, under any circumstances, cut or remove the earth pin from any plug. ONLY use
an extension cable having the same or higher electrical rating as the device being
connected.
•
Cables should be routed and secured properly to ensure they are not damaged during
normal operation. DO NOT use if any cable is cut, frayed or loosely connected to the
device. Cables may be damaged by inappropriate handling, e.g. by kinking, shearing or
other mechanical damages. The cables are only replaceable by authorised service
personnel.
•
When moving the bed ensure the power cable and pendants are secured. Ensure that the
castors do not roll over the cables. Do not use the assist bars or rails as handles when
moving the bed.