4
ASSEMBLY
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and re-
move the packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver
and
an
adjustable
wrench.
As you assemble the exercice bike, use the drawings below to identify small parts. The number in
parentheses below each drawing is the key number of the part, from the PART LIST near the end of
this manual. The number following the parentheses is the quantity needed for assembly.
Note: If a part is not in the hardware kit, check to see if it has been preassembled.
10
13
15
14
17
S6 2PCS
S5 1PCS
(S17,S19) 1PCS
26 M10 20 2PCS
33 M8X45 6PCS
37
! 12 M10 80
2PCS
BEFORE YOU BEGIN
Thank you for purchasing the Healthrider® Cross
Trainer 950. The elliptical provides an array of fea-
tures designed to make your workouts at home
more effective and enjoyable.
For your benefit, read this manual carefully be-
fore you use the elliptical. If you have questions
after reading this manual, please see the front
cover of this manual. To help us assist you, note
the product model
number and serial number before contacting us.
The model number is HRIVEL87514.0 and the lo-
cation of the serial number decal are shown on the
front cover of this manual.
Before reading further, please familiarize yourself
with the parts that are labeled in the drawing be-
low.
