eBABYHR DIGITAL BABY HEIGHT ROD
1
3
www.homscales.com
2
ON/OFF
min = 35 cm /
13.78
inches
max = 80,1 cm /
31.54
inches
6
feet/inch
cm
DIGITAL
ANALOG
• To prevent patient injury, the patient must be attended throughout the
entire weighing event. • Clean all external surfaces with a clean damp cloth.
• Do not immerse the product into cleaning solutions or water. • Do not use
abrasive cleaners. • Do not spray the product with liquid. • In no event
whatsoever shall Pelstar, LLC / Health o meter® Professional Scales be liable
for damages or injuries arising out of or connected with the assembly, use,
or misuse of its products.
8
HOLD
HOLD OFF
5
Slide open the battery compartment next to
the digital display. Insert 2 AAA batteries and
replace compartment cover.
To turn on the digital
display, press
ON/OFF.
Slide the measuring panel all the
way in towards the digital display.
Press
RESET
to set the height
reference point at 35 cm. This
step must be done each time the
height rod is powered on.
Place the baby on a flat surface. Position the non-moving
panel at the baby's head. Stretch the baby's legs and slide
the measuring panel towards the baby's feet.
Gently align the measuring panel at the soles of the baby's
feet and read the height on the display.
To view the height in another measuring unit,
press
UNIT.
To hold the height on the screen, press
HOLD
. To
release the height, press
HOLD
again.
4
RESET
min = 35 cm
7
UNIT
P/N UMeBABYHR_REV20180723
