4
Extra information:
After the power has been applied, press the power button, a buzzer will beep once
shortly. The LCD screen will now appear, after 2-3 seconds it will show the home screen
and enter standby mode.
Pressing the menu button will enable management of all possible massage functions and
the settings. To return to the home screen, press menu again.
Generation of negative ions:
When the massage chair is switched on, press the “OK”
button to turn on the air filter function. A green leaf will appear on the home screen of
the remote control.
Automatic massage:
The 4D massage chair has a shortcut to all the different automatic
massages. This can be found at the bottom left. Press one of the buttons to start an
automatic program. Press again to go to the next automatic program. The desired
program will appear at the top left of the screen.
An automatic program can be selected using the menu button. The cursor will be on the
“Automatic massage” function as standard. Press the OK button to go to the automatic
mode. There are six programs to choose from: “Soft”, “Power”, “Stretch”, “Vitality”,
“Normal” and “Sports”. There is also the “Special”, which consists of six additional
automatic massage programs.
After the power has been applied, the massage chair will detect the acupuncture point
position the first time the automatic program is used. “Acupuncture point tracking…” will
be displayed on the screen at this time. After acupuncture point tracking is complete, the
buzzer will sound five times (once per second); meanwhile, the massage chair will be
detecting the shoulder position. If the user thinks the position is incorrect, the up/down
navigation button can be used to adjust it. “Acupuncture point adjusting…” will be
displayed on the screen at this time. Note: this can only be adjusted for automatic
massages.
Manual massage:
The 4D massage chair has a shortcut to all the different manual
massages. This can be found at the bottom left. Press to start a manual program. Press
again to go to the next manual program. The desired program will appear at the top left
of the screen.
A manual program ca
n also be selected using the menu button. Select “Manual” using
the navigation button, press the OK button. There are five options: “Mode”, “Position”,
“Width”, “Speed”, “4D” and “Footrest”. Select the desired function, then press the OK
button to open the next menu. Select the desired massage or go back to the overview
using the left arrow of the navigation button. If the user starts a manual massage,
pressing the menu button will return the user to the home screen. The user can now use
the up/down button
to adjust the massage position. Information such as “Massage
position adjusting…” will be displayed on the display screen.
