Health in motion INSPIRE Скачать руководство пользователя страница 34

 

Warranty. 

This Warranty applies to Inspire Strength products manufactured or distributed by Health In Motion LLC.  

 

CONSUMER USE:  

 

 

 

 

 

 

 

LIGHT-COMMERCIAL USE:   

 

 

 

COMMERCIAL USE: 

LIMITED LIFETIME FRAME:

  

 

 

 

 

LIMITED LIFETIME FRAME:  

 

 

 

LIMITED LIFETIME FRAME:

 

Includes Frame and Welds  

 

 

 

 

 

Includes Frame and Welds  

 

 

 

 

Includes Frame and Welds 

LIMITED LIFETIME PARTS:  

 

 

 

 

10 YEAR PARTS:  

 

 

 

 

 

 

1 YEAR PARTS: 

Includes Upholstery, Hardware, etc.   

 

 

Includes Upholstery, Hardware, etc.   

 

Includes Upholstery, Cables, Hardware etc. 

LIMITED LIFETIME MOVING PARTS:   

 

10 YEAR MOVING PARTS:   

 

 

 

5 YEAR MOVING PARTS: 

Includes Pulleys, Cables, etc.   

 

 

 

 

Includes Pulleys, Cables, etc.   

 

 

 

Includes Pulleys, Bearings, etc. 

 

PLEASE NOTE THAT NOT ALL INSPIRE PRODUCTS ARE MADE FOR LIGHT-COMMERCIAL OR COMMERCIAL USE 

Refer to your Owner’s Manual or consult with your fitness product dealer to establish if a Product is made for 

consumer, light-commercial, or commercial use or not.  Using a non-commercial product in a commercial setting can 

result in serious injury or death! 

 

Health In Motion warrants that the Product you have purchased for commercial, light-commercial, personal, family or 

household use from Health In Motion LLC or from an authorized Health In Motion reseller is free from defects in 

materials or workmanship under normal use during the warranty period.  Your sales receipt, showing the date of 

purchase of the Product, is your proof of the date of purchase.  This warranty extends only to you, the original 

purchaser.  It is not transferable to anyone who subsequently purchases the Product from you.  It excludes 

expendable parts such as paint and finish.  This Warranty becomes VALID ONLY if the Product is assembled / installed 

according to the instructions / directions included with the Product.

 

Replacement and repair of parts. 

During the warranty period Health In Motion will repair or replace the Product if it becomes defective, malfunctions, or 

otherwise fails to conform with this Warranty under normal light-commercial, personal, family, or household use. In 

repairing the product Health In Motion may replace defective parts with, at the option of Health In Motion, serviceable 

used parts that are equivalent to new parts in performance, or new parts. All exchanged parts and Products replaced 

under this warranty will become the property of Health In Motion.  Health In Motion reserves the right to change 

manufacturers and or specification of any part to cover any existing warranty.

 

Service procedures. 

To obtain warranty parts, you must return the parts to Health In Motion or an authorized Health In Motion retailer in 

its original container (or equivalent).  You must pre-pay any shipping charges, taxes, or any other charges associated 

with transportation of the Product.  In addition, you are responsible for insuring any Product shipped or returned.  You 

assume the risk of loss during shipment.  You must present Health In Motion with proof-of-purchase documents 

(including the date of purchase, Model, and Serial Number).  Any evidence of alteration, erasing or forgery of proof -

of-purchase documents will be cause to void this Warranty. Register your warranty online visit 

www.inspirefitness.com

  

Conditions and Exceptions. 

This Warranty does not extend to any Product not purchased from Health In Motion LLC or from an authorized Health 

In Motion reseller.  This Warranty does not extend to any Product that has been damaged or rendered defective; (a) 

as a result of accident, misuse, or abuse; (b) by the use of parts not manufactured or sold by Health In Motion; (c) by 

modification of the Product; (d) as a result of service by anyone other than Health In Motion, or an authorized Health 

In Motion warranty service provider; (e) product that has not been properly maintained (follow maintenance schedule 

found on product).  Should any product submitted for Warranty service be found to be ineligible, an estimate of repair 

cost will be furnished and the repair will be made if requested by you upon Health In Motion receipt of payment or 

acceptable arrangement of payment.

 

Disclaimer 

EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY HEALTH IN MOTION MAKES NO OTHER WARRANTIES; 

EXPRESSED OR IMPLIED INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 

PARTICULAR PURPOSE.  HEALTH IN MOTION EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS 

WARRANTY.  ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS 

WARRANTY.  NEITHER HEALTH IN MOTION NOR ANY OF ITS AFFILIATES SHALL BE RESPONSIBLE FOR INCIDENTAL 

OR CONSEQUENTIAL DAMAGES.  HEALTH IN MOTION IS NOT RESPONSIBLE FOR THE REPAIR OR REPLACEMENT OF 

ANY PARTS THAT HEALTH IN MOTION DETERMINES HAVE BEEN SUBJECTED AFTER THE DATE OF MANUFACTURE TO 

ALTERATION, NEGLECT, ABUSE, MISUSE, NORMAL WEAR & TEAR, ACCIDENT, DAMAGE DURING TRANSIT OR 

INSTALLATION, FIRE, FLOOD, OR ANY ACT OF GOD.  SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN 

IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO 

THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY TO YOU.  This Warranty gives you specific legal rights and 

you may also have other rights that may vary from state to state.  This is the only express warranty applicable to 

Health In Motion’s “Inspire” branded strength products.  Health In Motion neither assumes nor authorizes anyone to 

assume for it any other express warranty.

 

Page 31 

Содержание INSPIRE



































Отзывы: