Leveling the Seat (Optional)
Make sure the two set screws are loose and do not come in contact with the inner shaft. Then rotate
the button head adjustment, with the Allen wrench, clockwise to tilt swing up and down until seat is
level and visually pleasing. Then tighten both set screws.
Leveling the Canopy (optional)
Leveling the Canopy can be achieved by placing an extra washer or two on either carriage bolt A or
carriage bolt B, between the Canopy Support Assembly and the Upper Upright.
Carriage Bolt A
Carriage Bolt B
Button Head Adjustment
18
Set Screws
