background image

Call Free 1.800.848.1633 • Fax Free 1.800.447.2923

 Web: www.GoHCL.com • Email: [email protected]

© Health Care Logistics, Inc. 2011

ASSEMBLY INSTRUCTIONS FOR

 

Lock & Locate

 Boxes (#18672 and 18677)

6

Step 6.

 Once level, tighten screws into the 

remaining holes.

7

8

9

Step 7.

 Push the locking box onto the Receiving 

Base. Continue pushing until the locking box clicks 

into place.

Step 8.

 Unlock the box.

Step 9.

 Pull up of the white button in the middle of 

the locking box. While pulling up on the button, pull 

the entire box forward off of the Receiving Base.

5

Step 5.

 Place a level on top of the Wall Mount.

Содержание Lock & Locate Series

Страница 1: ...s 18672 and 18677 1 Step 1 Clean surface and peel the protective backing from the Receiving Base 2 3 4 Step 2 Place the Receiving Base in the Wall Mount or on countertop cart top or shelves Step 3 Press firmly for several seconds to attach the Receiving Base Step 4 Loosely drive the screw into the desired location on the wall or cabinet Screws are not provided ...

Страница 2: ...Once level tighten screws into the remaining holes 7 8 9 Step 7 Push the locking box onto the Receiving Base Continue pushing until the locking box clicks into place Step 8 Unlock the box Step 9 Pull up of the white button in the middle of the locking box While pulling up on the button pull the entire box forward off of the Receiving Base 5 Step 5 Place a level on top of the Wall Mount ...

Страница 3: ...e reset button Rotate the face of cam until the code reset button comes into view Push this pin in with a paper clip and keep it pushed in Set your personal combination by turning the dials to the desired combination Release the reset button and your combination is set To lock rotate lock to locked position Rotate one or more dials after lock is closed To open the lock turn dials to your personal ...

Страница 4: ...ting your personal combination The combination is factory set at 0 0 0 Combination must be on opening number prior to resetting On the underside outer edge of the lock there is hole for the code reset button Rotate the face of cam until the code reset button comes into view Push this pin in with a paper clip and keep it pushed in Set your personal combination by turning the dials to the desired co...

Отзывы: