GIpro Mount
Instructions manual
Choose the proper shim
Insert the pin
Fasten the clamp
Disassemble the clamp. Separate the plastic shims
and unroll the thin shim. Depending on the target
tube diameter, select the right shim and place on the
handlebar.
Slide the pin in place, making sure the threaded hole is
aligned with the bolt hole.
Tighten the bolt with an
M5 hex (Allen) wrench
to secure the clamp on
the bar in the desired
position.
Wind the arm around the target tube then close.
If a plastic shim is used, rotate it into proper position.
Fully adjustable handlebar mount for GIpro
Place the clamp on the bar
w w w . h e a l t e c h - e l e c t r o n i c s . c o m
Thick
Thin
21-23mm (7/8”) : Thick Shim
24-26mm (1”)
: Thin Shim
27-29mm (9/8”) : Without Shim
