healing HHT651, Руководство по эксплуатации, Страница: 13 / 20

Tools main menu
Information
In "Tools" menu, select "Information", press the "OK" key to open
information window.
Press "EXIT" key to exit.
1
2
TOOLS
This menu displays receiver parameter information On Screen.
Factory Setting
This sub-menu allows you to re-set receiver parameters back to factory
default settings and clear all existing channels.
In the "Tools" menu, select "Factory Default", press the "OK" key.
You are asked to enter a password (default password is "0000").
1
2
Software Upgrade
Press "EXIT" key to exit.
Enter "Tools" menu, select "S/W Upgrade by OTA" or "Upgrade
by USB", press "OK" key, Software Upgrade menu is shown.
1
2
Press cursor key to select the desired item, then highlight
"Start" and press "OK" key to start upgrade.
3
A confirmation window is displayed.
Select "Yes" to reset to factory default settings and clear all channels.
Select "No" to cancel and retain present parameters and channels.
Press "EXIT" key to exit.
Operating software can be upgraded by USB storage device or
Over The Air broadcast where available.
4
1
2
3
Press the "MENU" key to enter main menu.
Press "UP" or "DOWN" key to select "Tools", press the "RIGHT"
key to enter the Tools menu.
Press "UP" or "DOWN" cursor key to highlight the desired item
and press "OK" key to enter the sub-menu.
Press the "EXIT" key to exit.
3
Tools
Information
Factory Setting
S/W Upgrade by OTA
Upgrade By USB
Remove USB device safely
Information
x.x.x
xxxxx
xxxxx
x.x.x
x.x.x xxx
xxxxx
xxxxx
xxx
xxx
Factory Setting
This operation will load default and erase all
the channels that user added, continue?
Yes No
Upgrade by USB
Upgrade Mode
Upgrade File
Start Allcode
No File
0%
Remove USB device safely
In "Tools" menu, select "Remove USB device safely",
Press "OK" key to confirm. Disk Remove window displays.
Press "OK" key again, options dim and Menu returns to "Tools;
"Information".
USB device can now be safely disconnected.
Disk Remove
Remove
OK
USB Disk A-3 GB
Cancel
1
English
10