Headwaver TAG, Инструкция по эксплуатации

Страница: 7 / 77

5
English
Using Headwave TĀG
1. Press the button once to power the unit on. The
LEDs are green while turning one.
2. If you haven’t paired the device already the LEDs blink blue to indicate
it’s searching for a connection. If you have paired the device already
and the LEDs are GREEN then you can skip the next two steps.
3. Go to your mobile device and to Bluetooth® settings. The device should
be listed as “Headwave TAG”. If a key is required please enter 0000.
4. Once it’s paired, the LEDs switch to GREEN.
5. Headwave TĀG is capable of streaming music over Bluetooth® either
from a mobile phone or any other Bluetooth® device supporting
A2DP. Once you have paired TĀG with your device, use your
music player to play, pause, stop, skip and adjust the volume.
6. To power off, press and hold the button for
2 seconds. The LED will turn off.