HE-VA Tip-Roller XL, Руководство по эксплуатации

Страница: 5 / 48

GB Tip-Roller XL 12,3 – 15,3 m 26-03-2019
4
Back to the table of contents
1. Description of the machine
The Tip-Roller XL is a 5-section hydraulic roller, with a 2-section wheel frame. The main purpose
of the divided wheel frame is to reduce the radius when turning in transport position and lower
height in transport postition. The roller sections is mounted in a middle suspension. This
construction gives the sections an independent movement from each other, which makes the roller
able to follow the surface in uneven or hilly areas.
The roller is mounted with He-Va SAT-system which is a weight distribution system to reduce
weight from the chassis and middle section roller and transfer weight evenly to the wing sections.
Before operating the Tip-Roller this operating and safety instruction must be studied very
carefully
.
2
.
Delivery Check
Check the roller for any damages. Check the hydraulic hoses for cuts and squeezing damages.
Check also the other hydraulic components, are not damaged during transport.
Check that the frame construction has not been damaged. You should also check that the roller
blocks have not been exposed to impacts, which may have damaged the cast roller rings or the
double-sealed ball bearings.
Finally check that the transport wheels are tightened and OK.
Check the air pressure in the tyres: approx. 3.8 bar / 55 psi
Transport Brackets
At delivery the machine is mounted with brackets for hoisting gear,
which is not painted.
These brackets is for attachment of chains or straps, when loading
or unloading the machine from the transport vehicle, and they must
be dismantled before use.
3. Specifications
5-section hydraulic wheel-mounted field roller with free movability in all sections. Used for rolling
of stones and packing of the top soil. The roller is available with a working width of 12,3 m or 15,3
m and with five different ring types: Cambridge-, Cam-, Star-, 2D wave-, and Crosskill rings.