HE-VA 15.01, Инструкция по сборке и руководство по эксплуатации

Страница: 4 / 20

UK 27-05-2013
F r o n t – L i f t 1 5 . 0 1
4
1. Delivery Check
Both on delivery to the distributor/supplier and to the customer, the Front-Lift must be checked on
any damages.
Check the hydraulic hoses on cuts and squeezing damages. Check that the other hydraulic
components have not been damaged in transit.
2. Maschine Description
2.1. Application
The Front-Lift is for mounting at the front of tractors. The Front-Lift is developed for a variety of
various tractor models and may be equipped with short or long side members according to the
tractor design. Absorbers, spring suspension and double-acting hydraulics can be fitted as
accessories. In the Front-Lift, different tools can be fitted: roller, land-packer, harrow, sweeper,
snow plough, etc. With the Front-Lift, the tools can be lifted and lowered and put in the required
working position. When working with swinging land-packers, etc., causing considerable torsional
stresses in the Front-Lift and the tractor, the additional support of the lift arms must be used. HE-
VA delivers such additional support as accessories.
If the tractor is exposed to such torsional
stresses, HE-VA does not assume any responsibility for damages to the tractor.
2.2. Technial Specifications
Lifting capacity at an oil pressure of 210 bar
1.500 kg
Maximum load in coupling eyes 1.500 kg
Quick-couplings standard 1/2" kegletype ISO 7241
Hydraulic oil: The system is filled up Agip OSO 32
Noise level under 70 dB (A)
The Front-Lift complies with DS/ISO 8759/2, Nov. 86 as regards the dimensions, locations and
lifting height (category II) of the coupling points. 825 mm between the quick-couplings/Ø28 mm
pin.
NOTICE! The front-lift must not be used for passenger transport.