5
www.observint.com
© 2019 Observint Technologies. All rights reserved.
2.
Pan adjustment
: While observing video from the camera, rotate the enclosure with the turret to
point the camera in the direction of your surveillance target.
0° ~ 360°
Pan: adjustment
3.
Tilt adjustment
: Turn the camera turret assembly within the enclosure to point it at the center of
your surveillance target.
0° ~ 75°
Tilt: Use for
elevation
adjustment
4.
Rotation adjustment:
Rotate the camera turret assembly within the enclosure to align the
camera with the horizon in the field of view.
0° ~ 360°
Rotation adjustment
5.
Use the recorder console or web interface to adjust the zoom.
6.
Make additional pan, tilt and/or rotation adjustments using the steps above as needed to perfect the
camera field of view.
7.
Tighten the clip plate screw to hold the turret in position.
8.
Reinstall the trim ring.
Step 5. Additional Setup procedures
Refer to the
User Manual
for your camera for procedures to customize your camera for your surveillance
application.
Specifications
Model
R8VTPS
Resolution
3840 (H) × 2160 (V), 8MP
Image sensor
1/2.5” Progressive CMOS sensor
Min. illumination
Color 0.1 lux @ F1.2 (AGC ON); B/W 0 lux @ IR ON
Shutter
1/5 ~ 1/20000s
Slow shutter
Supported
Lens
3.3 ~ 12 mm (Motorized), horizontal FOV: 105 ~ 37°
3-axis adjustment
Pan: 0 ~ 360°, tilt: 0 ~ 75°, rotate: 0 ~ 360°
F No.
F No. wide: 1.4 ~ tele: 2.8 ± 5%
Day & Night
IR cut filter with auto switch
Digital noise reduction:
3D-DNR
WDR
120 dB
Video compression
H.265 / H.264
Video bit rate
8 Kbps ~ 16 Mbps
Triple Stream
Yes
Resolution
Main Stream
: (1 ~ 30 fps, default 30 fps)
8 MP (3840 × 2160), 5 MP (3072 × 1728, 2592 × 1944), 4 MP (2592 × 1520),
3 MP (2304 × 1296), 1080P (1920 × 1080), 720P (1280 × 720)
Sub Steam
(1 ~ 30 fps, default 15 fps)
1080P (1920 × 1080), 720P (1280 × 720), VGA (640 × 480), QVGA (320 × 240)
Mobile Stream
(1 ~ 30 fps, default 10 fps)
VGA (640 × 480), QVGA (320 × 240)
Image settings:
Flip, Rotation, Saturation, Brightness, Contrast, Hue, Sharpness adjustable
BLC
Supported
ROI
Supported
Privacy mask
Supported
Protocols
TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, PPPoE, SMTP, NTP, UPnP, SNMP, HTTPS, FTP,
System compatibility
ONVIF (Profile S, Profile G)
Interface
1 × RJ45 10M / 100M Ethernet interface
Led
40 pcs (SMD)
IR range
Up to 150 ft (45 m)
Alarm triggers
1 × input , 1 × output
Audio
1 × input / 1 × output (RCA)
Video output
Yes
Reset button
Yes
PoE
Yes
Ratings
IP66 (weatherproof)
Power supply
12 Vdc / POE
Consumption
≤ 9 W
Dimension
Ø5.35 × 5.04 in (Ø136 × 128 mm)
Weight
1.59 lb (720 g) approx.
Storage temperature
-22° ~ +140°F (-30° ~ +60°C)
Operating temperature
-22° ~ +131°F (-30° ~ +55°C)
Cleaning
Clean the camera with an approved glass cleaning solution and a lint free cloth.
•
Dust can be removed from the unit by wiping it with a soft damp cloth. To remove stains, gently rub
the surface with a soft cloth moistened with a mild detergent solution, then rinse and dry it with a
soft cloth. Do not use benzene, thinner or other chemical products on the camera assembly; these
may dissolve the paint and promote damage of the surfaces.
•
Remove all foreign particles, such as plastic or rubber materials, attached to the camera housing.
These may cause damage to the surface over time.
