up to position (0,0,0,0). Then insert the HDBaseT input card back to the matrix and disconnect
the HDMI cable. EDID setup finished.
POC DIP switch on the HDBaseT card
There’s a 4-pin black DIP on the HDBaseT card, it’s able to set up the POC function as 12V, 24V
and POC function off.
Set POC to 12V:
Have the DIP switch A,B up, and the C,D to down position
Set POC to 24V:
Have the DIP switch A,C down, and the B,D to up position
