Apply a very thin layer of thermal paste to the copper baseplate surface. Install
4pcs
plastic
screw holder
H-8
onto the four corners.
Install the copper base to the motherboard using
4pcs
H-3
. Do not over tighten
H-3
as this
will bend the rack and put too much pressure on CPU. There should be a small gap between
the bottom of
H-8
and motherboard surface after
H-3
screws is tightened.
Warning: Don't over use the thermal paste as it will decrease the thermal transfer efficiency.
Install the motherboard to the H1 V3 chassis bottom plate using
A
.
Apply a very thin layer of thermal paste to the heatpipe groove on both side panels using the
dumbbell shape tool. Install both side panels on the H1 V3 bottom plate using
C
.
Warning: Don't over use the thermal paste as it will decrease the thermal transfer efficiency.
