HDL HDL-MWM70, Руководство пользователя

Страница: 6 / 8

HDL ®
HDL-MWM70 Curtain Assembly Manual
www.hdlautomation.com
4
(4) Adjust the belt’s position, insert the clamp3 between the fixture1 and the clamp2,
next to the clamp2.
(5) Adjust the positions according to the figure, put the master carrier1 onto the
clamp2
、
3, its handle should point to the fixture1.
(6) Thread the other side of the belt into the other rail, drag it to the drive unit, then pull
it out. At the same time, push the master carrier1 into the rail.
(7) At the end of the belt, insert the clamp4, then plug the fixture2.
(8) Adjust the belt, make the fixture1 and fixture2 closer, and place the rubber (the
rubber can buffer the collision between two handles of the master carrier)
Fixture2
Master Carrier1
Clamp4
Master Carrier1
Master carrier1
Fixture1
Clamp2 Clamp3
Clamp2
Fixeture1
Clamp3
固定卡 1
Clamp2
Fixture1
Fixture1
固定卡 1 固定卡 1
Master carrier1
Master carrier1
Fixture1
Fixture1