Prism Lite Series Touch Panel User Manual
HDL Automation Co., Ltd.
http://www.hdlautomation.com
6
the light is turned off, and recall the status when turned on next time.
④
Mutual: only available when “Combination ON”, “Combination OFF” or “Combination
ON/OFF” is selected. The ON/OFF status of the selected buttons are mutually exclusive.
(Only one group of exclusive relationships is available in Prism Panel.)
⑤
Linkage: only available when “Single ON”, “Single OFF” or “Single ON/OFF” is selected.
Enter the button ID to link 2 buttons together for controlling one same target. The target
of the button with the smaller ID should prevail, while 0 means no button is linked to this
button.
Figure 3-2 Button status setting
3.3 Target Setting
Select the button for target configuration on the left, and click “Target” button on the right to
open “Target” window, as shown in Figure 3-3.
Notice:
The number of the target depends on the button mode, Only one target is supported except
“Combination ON”, “Combination OFF”, “Combination ON/OFF“, “Double click/combined”,
“Short/long press”, “Short press/long jog”.
