HDI 2522, Руководство пользователя

Страница: 5 / 36

HDI 2522 Position Indicator Gauge
IECEX/ATEX User’s Manual – HDI 2522, Rev A | November,2019
5
1.C Cautionary Information
1.C.1 Power
This system is powered by an internal power pack HDI part number HDIBATT-E608-DOT-AA. The 2522
gauge will be damaged if connected to a 12 or 24VDC system. Note that the battery should only be
replaced while in a non-hazardous area.
1.C.2 Exposed Electronics
CAUTION
: Do not leave the equipment exposed to outside elements without being properly
connected as this may expose the connector leads to moisture and outside elements damaging the
electronics.
1.C.3 Cleaning
CAUTION
: The customer should use caution when cleaning the Gauge (LCD) Head to prevent any
static discharge. From time to time the customer will need to use a damp cloth to clean the LCD overlay
or the gauge case. HDI suggests that the customer use a soft cloth to prevent accidental damage
(scratching) to the protective lens.
1.C.4 Returns
HDI requires that inbound returns should have a Return Material Authorization (RMA) control number
issued from the HDI website. The customer will find this by visiting the website:
http://hdigauges.com/quality/repairs/ and complete the required fields to identify basic contact details.
HDI will then provide the customer repair return quotation and will contact the customer for additional
clarity if necessary. The customer may return multiple units on one RMA submittal request. HDI will
use the inbound notification email for all related correspondence. Proper protection of the equipment
should be a top priority when returning the equipment back to HDI or an authorized agent for repair.
Additionally, it is the shipper’s responsibility to ensure equipment clears all customs as different agencies
may hold equipment without notifying HDI.