HDE V-WATCH, Руководство по эксплуатации, Страница: 14 / 24

INSTRUCTIONS FOR USE
NOT FOR USE BELOW 2400 VOLTS AC.
Before using, read the entire instruction manual and
review product labeling. Pull the top of the unit up to
verify a good battery and to perform a self test. The
test circuitry generates an internal voltage which the
detector then detects and indicates by turning on the
lights and sounding the beeper. DO NOT USE the
detector if the self test error tone is heard or if the
detector fails to activate the lights and beeper. Remove
from service and contact the factory to arrange for repair.
The detector should always be worn facing any
potential high voltage electricity. Wear the detector in
14
outage and the delta system can continue to operate
with this grounded phase. If this phase is grounded
as a result of a downed conductor or other storm
damage, it may be grounded only temporarily and
could become reenergized if moved or disturbed.
The
V-Watch Personal Voltage Detector will not detect
any grounded conductor, whether it is a grounded
delta phase conductor, a guy wire or a pole ground.
WARNING: Treat all conductors as live
unless or until there is a visible break
from a live source and a ground is in place.